refactor error messages to save space

Author: dhalbert

locale/circuitpython.pot

@@ -89,13 +89,19 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/alarm/__init__.c
-#: ports/cxd56/common-hal/analogio/AnalogOut.c ports/cxd56/common-hal/rtc/RTC.c
-#: ports/espressif/common-hal/rtc/RTC.c
+#: ports/atmel-samd/common-hal/alarm/touch/TouchAlarm.c
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c
+#: ports/atmel-samd/common-hal/busio/SPI.c
+#: ports/cxd56/common-hal/analogio/AnalogOut.c
+#: ports/cxd56/common-hal/busio/SPI.c ports/cxd56/common-hal/rtc/RTC.c
+#: ports/espressif/common-hal/busio/SPI.c ports/espressif/common-hal/rtc/RTC.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/alarm/__init__.c
-#: ports/nrf/common-hal/analogio/AnalogOut.c ports/nrf/common-hal/rtc/RTC.c
-#: ports/raspberrypi/common-hal/alarm/__init__.c
+#: ports/nrf/common-hal/analogio/AnalogOut.c ports/nrf/common-hal/busio/SPI.c
+#: ports/nrf/common-hal/rtc/RTC.c ports/raspberrypi/common-hal/alarm/__init__.c
 #: ports/raspberrypi/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 #: ports/raspberrypi/common-hal/rtc/RTC.c ports/stm/common-hal/alarm/__init__.c
 #: ports/stm/common-hal/canio/Listener.c ports/stm/common-hal/rtc/RTC.c
 #: shared-bindings/audiobusio/I2SOut.c shared-bindings/audiobusio/PDMIn.c
@@ -112,6 +118,10 @@ msgstr ""
 msgid "%q and %q must be different"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
+msgid "%q and %q must share a clock unit"
+msgstr ""
+
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q contains duplicate pins"
 msgstr ""
@@ -241,6 +251,10 @@ msgstr ""
 msgid "%q step cannot be zero"
 msgstr ""
 
+#: shared-module/bitbangio/I2C.c
+msgid "%q too long"
+msgstr ""
+
 #: py/bc.c py/objnamedtuple.c
 msgid "%q() takes %d positional arguments but %d were given"
 msgstr ""
@@ -419,12 +433,6 @@ msgstr ""
 msgid "3-arg pow() not supported"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
-#: ports/atmel-samd/common-hal/countio/Counter.c
-#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
-msgid "A hardware interrupt channel is already in use"
-msgstr ""
-
 #: ports/espressif/common-hal/analogio/AnalogIn.c
 msgid "ADC2 is being used by WiFi"
 msgstr ""
@@ -595,10 +603,6 @@ msgstr ""
 msgid "Bit clock and word select must be sequential pins"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
-msgid "Bit clock and word select must share a clock unit"
-msgstr ""
-
 #: shared-bindings/bitmaptools/__init__.c
 msgid "Bitmap size and bits per value must match"
 msgstr ""
@@ -611,10 +615,6 @@ msgstr ""
 msgid "Both RX and TX required for flow control"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
-msgid "Both pins must support hardware interrupts"
-msgstr ""
-
 #: shared-bindings/displayio/Display.c
 #: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Brightness not adjustable"
@@ -800,10 +800,6 @@ msgstr ""
 msgid "CircuitPython core code crashed hard. Whoops!\n"
 msgstr ""
 
-#: shared-module/bitbangio/I2C.c
-msgid "Clock stretch too long"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Clock unit in use"
 msgstr ""
@@ -921,9 +917,12 @@ msgstr ""
 msgid "ESP-IDF memory allocation failed"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
+#: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
+#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 msgid "EXTINT channel already in use"
 msgstr ""
@@ -1076,13 +1075,6 @@ msgstr ""
 msgid "Group already used"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/SPI.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
-#: ports/raspberrypi/common-hal/busio/SPI.c
-msgid "Half duplex SPI is not implemented"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "Hard fault: memory access or instruction error."
 msgstr ""
@@ -1508,10 +1500,15 @@ msgstr ""
 msgid "No default %q bus"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 msgid "No free GCLKs"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
+msgid "No free GLCKs"
+msgstr ""
+
 #: shared-bindings/os/__init__.c
 msgid "No hardware random available"
 msgstr ""
@@ -1748,6 +1745,7 @@ msgid "Pin must be on PWM Channel B"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/countio/Counter.c
+#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Pin must support hardware interrupts"
 msgstr ""
 
@@ -1888,10 +1886,6 @@ msgstr ""
 msgid "Requested resource not found"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/audioio/AudioOut.c
-msgid "Right channel unsupported"
-msgstr ""
-
 #: main.c
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr ""
@@ -2086,7 +2080,6 @@ msgstr ""
 msgid "Total data to write is larger than %q"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/touch/TouchAlarm.c
 #: ports/raspberrypi/common-hal/alarm/touch/TouchAlarm.c
 #: ports/stm/common-hal/alarm/touch/TouchAlarm.c
 msgid "Touch alarms not available"
@@ -2178,11 +2171,6 @@ msgstr ""
 msgid "Unable to find I2C Display at %x"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
-#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
-msgid "Unable to find free GCLK"
-msgstr ""
-
 #: py/parse.c
 msgid "Unable to init parser"
 msgstr ""
@@ -2655,11 +2643,6 @@ msgstr ""
 msgid "can't convert %q to %q"
 msgstr ""
 
-#: py/obj.c
-#, c-format
-msgid "can't convert %s to complex"
-msgstr ""
-
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr ""
@@ -2668,18 +2651,10 @@ msgstr ""
 msgid "can't convert complex to float"
 msgstr ""
 
-#: py/obj.c
+#: py/obj.c py/runtime.c
 msgid "can't convert to %q"
 msgstr ""
 
-#: py/obj.c
-msgid "can't convert to complex"
-msgstr ""
-
-#: py/runtime.c
-msgid "can't convert to int"
-msgstr ""
-
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr ""

ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c

@@ -235,7 +235,7 @@ static void pinalarm_set_alarms_light(size_t n_alarms, const mp_obj_t *alarms) {
         case PINALARM_ERR_NOEXTINT:
             raise_ValueError_invalid_pin();
         case PINALARM_ERR_NOCHANNEL:
-            mp_raise_RuntimeError(translate("A hardware interrupt channel is already in use"));
+            mp_raise_RuntimeError(translate("EXTINT channel already in use"));
         default:
             mp_raise_RuntimeError(translate("Unknown reason."));
     }

ports/atmel-samd/common-hal/alarm/touch/TouchAlarm.c

@@ -28,5 +28,5 @@
 #include "shared-bindings/microcontroller/__init__.h"
 
 void common_hal_alarm_touch_touchalarm_construct(alarm_touch_touchalarm_obj_t *self, const mcu_pin_obj_t *pin) {
-    mp_raise_NotImplementedError(translate("Touch alarms not available"));
+    mp_raise_NotImplementedError_varg(translate("%q"), MP_QSTR_TouchAlarm);
 }

ports/atmel-samd/common-hal/audiobusio/I2SOut.c

@@ -157,7 +157,7 @@ void common_hal_audiobusio_i2sout_construct(audiobusio_i2sout_obj_t *self,
         raise_ValueError_invalid_pin_name(MP_QSTR_word_select);
     }
     if (bc_clock_unit != ws_clock_unit) {
-        mp_raise_ValueError(translate("Bit clock and word select must share a clock unit"));
+        mp_raise_ValueError_varg(translate("%q and %q must share a clock unit"), MP_QSTR_bit_clock, MP_QSTR_word_select);
     }
     if (serializer == 0xff) {
         raise_ValueError_invalid_pin_name(MP_QSTR_data);
@@ -241,7 +241,7 @@ void common_hal_audiobusio_i2sout_play(audiobusio_i2sout_obj_t *self,
     // Find a free GCLK to generate the MCLK signal.
     uint8_t gclk = find_free_gclk(divisor);
     if (gclk > GCLK_GEN_NUM) {
-        mp_raise_RuntimeError(translate("Unable to find free GCLK"));
+        mp_raise_RuntimeError(translate("No free GLCKs"));
     }
     self->gclk = gclk;
 

ports/atmel-samd/common-hal/audiobusio/PDMIn.c

@@ -195,7 +195,7 @@ void common_hal_audiobusio_pdmin_construct(audiobusio_pdmin_obj_t *self,
     // Find a free GCLK to generate the MCLK signal.
     uint8_t gclk = find_free_gclk(clock_divisor);
     if (gclk > GCLK_GEN_NUM) {
-        mp_raise_RuntimeError(translate("Unable to find free GCLK"));
+        mp_raise_RuntimeError(translate("No free GCLKs"));
     }
     self->gclk = gclk;
 

ports/atmel-samd/common-hal/audioio/AudioOut.c

@@ -133,7 +133,7 @@ void common_hal_audioio_audioout_construct(audioio_audioout_obj_t *self,
     }
     #ifdef SAMD21
     if (right_channel != NULL) {
-        mp_raise_ValueError(translate("Right channel unsupported"));
+        mp_raise_NotImplementedError_varg(translate("%q"), MP_QSTR_right_channel);
     }
     if (left_channel != &pin_PA02) {
         raise_ValueError_invalid_pin();

ports/atmel-samd/common-hal/busio/SPI.c

@@ -59,7 +59,7 @@ void common_hal_busio_spi_construct(busio_spi_obj_t *self,
     uint8_t dopo = 255;
 
     if (half_duplex) {
-        mp_raise_NotImplementedError(translate("Half duplex SPI is not implemented"));
+        mp_raise_NotImplementedError_varg(translate("%q"), MP_QSTR_half_duplex);
     }
 
     // Ensure the object starts in its deinit state.

ports/atmel-samd/common-hal/countio/Counter.c

@@ -18,7 +18,7 @@ void common_hal_countio_counter_construct(countio_counter_obj_t *self,
 
     if (eic_get_enable()) {
         if (!eic_channel_free(pin->extint_channel)) {
-            mp_raise_RuntimeError(translate("A hardware interrupt channel is already in use"));
+            mp_raise_RuntimeError(translate("EXTINT channel already in use"));
         }
     } else {
         turn_on_external_interrupt_controller();

ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c

@@ -38,15 +38,15 @@
 void common_hal_rotaryio_incrementalencoder_construct(rotaryio_incrementalencoder_obj_t *self,
     const mcu_pin_obj_t *pin_a, const mcu_pin_obj_t *pin_b) {
     if (!pin_a->has_extint || !pin_b->has_extint) {
-        mp_raise_RuntimeError(translate("Both pins must support hardware interrupts"));
+        mp_raise_RuntimeError(translate("Pin must support hardware interrupts"));
     }
 
     // TODO: The SAMD51 has a peripheral dedicated to quadrature encoder debugging. Use it instead
     // of the external interrupt.
 
     if (eic_get_enable()) {
         if (!eic_channel_free(pin_a->extint_channel) || !eic_channel_free(pin_b->extint_channel)) {
-            mp_raise_RuntimeError(translate("A hardware interrupt channel is already in use"));
+            mp_raise_RuntimeError(translate("EXTINT channel already in use"));
         }
     } else {
         turn_on_external_interrupt_controller();

ports/cxd56/common-hal/busio/SPI.c

@@ -40,7 +40,7 @@ void common_hal_busio_spi_construct(busio_spi_obj_t *self, const mcu_pin_obj_t *
     int port = -1;
 
     if (half_duplex) {
-        mp_raise_NotImplementedError(translate("Half duplex SPI is not implemented"));
+        mp_raise_NotImplementedError_varg(translate("%q"), MP_QSTR_half_duplex);
     }
 
     if (clock->number == PIN_SPI4_SCK &&