Run astyle to fix errors in github actions

Author: shunceyb

variants/STM32H7xx/H723V(E-G)(H-T)_H730VB(H-T)_H733VG(H-T)/variant_WeActMiniH723VGTX.cpp

@@ -10,7 +10,7 @@
  *
  *******************************************************************************
  */
-#if defined(ARDUINO_WeActMiniH723VGTX) 
+#if defined(ARDUINO_WeActMiniH723VGTX)
 #include "pins_arduino.h"
 
 // Digital PinName array
@@ -133,7 +133,7 @@ WEAK void SystemClock_Config(void)
   */
   __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0);
 
-  while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
+  while (!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
 
   /** Configure LSE Drive Capability
   */
@@ -143,7 +143,7 @@ WEAK void SystemClock_Config(void)
   /** Initializes the RCC Oscillators according to the specified parameters
   * in the RCC_OscInitTypeDef structure.
   */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE|RCC_OSCILLATORTYPE_LSE;
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_LSE;
   RCC_OscInitStruct.HSEState = RCC_HSE_ON;
   RCC_OscInitStruct.LSEState = RCC_LSE_ON;
   RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
@@ -156,16 +156,15 @@ WEAK void SystemClock_Config(void)
   RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2;
   RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
   RCC_OscInitStruct.PLL.PLLFRACN = 0;
-  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
-  {
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
     Error_Handler();
   }
 
   /** Initializes the CPU, AHB and APB buses clocks
   */
-  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
-                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2
-                              |RCC_CLOCKTYPE_D3PCLK1|RCC_CLOCKTYPE_D1PCLK1;
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+                                | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2
+                                | RCC_CLOCKTYPE_D3PCLK1 | RCC_CLOCKTYPE_D1PCLK1;
   RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
   RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
   RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV1;
@@ -174,17 +173,16 @@ WEAK void SystemClock_Config(void)
   RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
   RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
 
-  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK)
-  {
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK) {
     Error_Handler();
   }
 
   PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB | RCC_PERIPHCLK_OSPI
-                                            | RCC_PERIPHCLK_SDMMC | RCC_PERIPHCLK_ADC
-                                            | RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_USART16
-                                            | RCC_PERIPHCLK_USART234578 | RCC_PERIPHCLK_I2C123
-                                            | RCC_PERIPHCLK_I2C4 | RCC_PERIPHCLK_SPI123
-                                            | RCC_PERIPHCLK_SPI45 | RCC_PERIPHCLK_SPI6;
+                                             | RCC_PERIPHCLK_SDMMC | RCC_PERIPHCLK_ADC
+                                             | RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_USART16
+                                             | RCC_PERIPHCLK_USART234578 | RCC_PERIPHCLK_I2C123
+                                             | RCC_PERIPHCLK_I2C4 | RCC_PERIPHCLK_SPI123
+                                             | RCC_PERIPHCLK_SPI45 | RCC_PERIPHCLK_SPI6;
   PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL;
   PeriphClkInitStruct.OspiClockSelection = RCC_OSPICLKSOURCE_D1HCLK;
   PeriphClkInitStruct.SdmmcClockSelection = RCC_SDMMCCLKSOURCE_PLL;
@@ -199,8 +197,7 @@ WEAK void SystemClock_Config(void)
   PeriphClkInitStruct.Spi6ClockSelection = RCC_SPI6CLKSOURCE_D3PCLK1;
 
 
-  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
-  {
+  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) {
     Error_Handler();
   }
 }