Merge pull request #437 from sparkfun/EVK_docs

Add corrections priority animation

Author: PaulZC

docs/img/Terminal/SparkFun RTK Everywhere - Corrections Priorities Menu.png

@@ -8,18 +8,27 @@ Torch: ![Feature Supported](img/Icons/GreenDot.png) / EVK: ![Feature Supported](
 
 To achieve an RTK Fix, SparkFun RTK products must be provided with a correction source. An RTK device can obtain corrections from a variety of sources. Below is the list of possible sources (not all platforms support all sources) and their default priorities:
 
+* External Radio
+* ESP-Now
+* LoRa Radio
 * Bluetooth
-* IP (PointPerfect/MQTT)
 * TCP (NTRIP)
 * L-Band
-* External Radio
-* LoRa Radio
-* ESP-Now
+* IP (PointPerfect/MQTT)
 
 The *Corrections Priorities* menu allows a user to specify which correction source should be given priority. For example, if corrections are provided through Bluetooth and L-Band simultaneously, the corrections from L-Band will be discarded because the Bluetooth source has a higher priority. This prevents the RTK engine from receiving potentially mixed correction signals.
 
 ![RTK Corrections Priorities Menu](<img/Terminal/SparkFun RTK Everywhere - Corrections Priorities Menu.png>)
 
-In the serial terminal menu, pressing a letter will increase or decrease the position of a priority. For example, in the image above, pressing **D** will raise the `L-Band` priority above `TCP (NTRIP)`.
+In the serial terminal menu, pressing a letter will increase or decrease the position of a priority. For example, in the image above, pressing **F** will raise the `L-Band` priority above `TCP (NTRIP)`.
+
+In the web config page:
+
+* Clicking a source increases its priority
+* Clicking the highest priority source makes it the lowest priority
+* Clicking 'Reset to Defaults' will restore the priorities to their default setting
+* Click 'Save Configuration', then 'Exit and Reset' to save the changes
+
+![RTK Corrections Priorities Web Config](<img/WiFi Config/SparkFun RTK Corrections Priority.gif>)
 
 Please see [Correction Sources](correction_sources.md) for a description of where to obtain corrections.

docs/img/WiFi Config/SparkFun RTK Corrections Priority.gif

@@ -126,15 +126,16 @@ Steps to use PointPerfect:
 
     *WiFi Menu containing one network*
 
-6. Under the *PointPerfect Configuration* menu, **Enable PointPefect Corrections** and select your **Geographic Region**.
+6. Under the [*PointPerfect Configuration* menu](menu_pointperfect.md), **Enable PointPefect Corrections** and select your **Geographic Region**. If desired, enable **Localized Corrections** and **AssistNow**.
 
-    ![PointPerfect Configuration Menu](<img/WiFi Config/SparkFun RTK WiFi Config - PointPerfect Menu.png>)
+    ![PointPerfect Configuration Menu](<img/WiFi Config/SparkFun RTK PointPerfect Config.png>)
 
     *PointPerfect Configuration Menu*
 
     !!! note
         It is important that you set your Geographic Region correctly, via the menu or web config page, as this determines both the IP correction distribution topic and the L-Band frequency (on L-Band-capable products).
 
+
 7. Click **Save Configuration**. The device will record all settings in a few seconds. Then press **Exit and Reset**. The unit will now reboot.
 
     ![Saving and All Saved notifications](<img/WiFi Config/SparkFun RTK WiFi Config - Save Steps.png>)