digi2raw test

[lietava]

Please take latest ctpdev and test digi2raw:

• produce digits as before
  -run digi2raw

[mbombara]

I updated the installation with the latest ctpdev. I run these commands:

o2-sim -n 10 -m FT0 FV0 ITS CTP -g pythia8 -j10
o2-sim-digitizer-workflow -b
o2-ctp-digi2raw

running o2-ctp-digi2raw produces file CTPraw.cfg with this content:

#[defaults]
#dataOrigin = CTP
#dataDescription = RAWDATA
#readoutCard = CRU

Nothing else. Was this desired output? I have not found any .raw file.

[lietava]

Marek, thanks. It should produce raw data somewhere. Please, check. There should be also log somewhere. Have s look in digi2raw.cxx.
@shahor02 any comments ?
Cheers, Roman.

[mbombara]

Even if I set the output directory like:

mkdir ctpoutput
o2-ctp-digi2raw -o ctpoutput

there is only CTPraw.cfg in ctpoutput. I can see in digi2raw.cxx that output file should be ctp.raw. In the code, the function processDigits reads ctpdigits.root but I am not sure where the writing raw data happens.

[shahor02]

Hi, I also run ctpdev and see problems, left in-line comments in the PR.

[shahor02]

Also, could you update you do

git checkout dev
git pull
git checkout ctpdev
git rebase dev
git push -f cptdev

otherwise it takes ages to recompile your branch.

[lietava]

@mbombara there is new version which produces nonempty file. Please, have a look.

[lietava]

o2-sim -n 10 -m FT0 FV0 ITS CTP -g pythia8 -j10 - fails on my computer now:
[INFO] Process 20408 EXITED WITH CODE 0 SIGNALED 1 SIGNAL 6
o2-sim -n 10 -m FT0 FV0 ITS CTP -j10 runs ok
@shahor02 Any hint ?

[mbombara]

I cannot pull:

mbombara@MacBook-Pro-3 O2 % git pull origin ctpdev
remote: Enumerating objects: 1076, done.
remote: Counting objects: 100% (719/719), done.
remote: Compressing objects: 100% (70/70), done.
remote: Total 1076 (delta 655), reused 680 (delta 645), pack-reused 357
Receiving objects: 100% (1076/1076), 510.71 KiB | 2.81 MiB/s, done.
Resolving deltas: 100% (755/755), completed with 329 local objects.
From https://github.com/lietava/AliceO2
 * branch                  ctpdev     -> FETCH_HEAD
 + 399afc700c...11a701b295 ctpdev     -> origin/ctpdev  (forced update)
CONFLICT (add/add): Merge conflict in Detectors/CTP/simulation/src/digi2raw.cxx
Auto-merging Detectors/CTP/simulation/src/digi2raw.cxx
CONFLICT (add/add): Merge conflict in Detectors/CTP/simulation/src/Digits2Raw.cxx
Auto-merging Detectors/CTP/simulation/src/Digits2Raw.cxx
Auto-merging Detectors/CTP/simulation/src/Digitizer.cxx
CONFLICT (add/add): Merge conflict in Detectors/CTP/simulation/include/CTPSimulation/Digits2Raw.h
Auto-merging Detectors/CTP/simulation/include/CTPSimulation/Digits2Raw.h
CONFLICT (add/add): Merge conflict in Detectors/CTP/macro/CreateCTPConfig.C
Auto-merging Detectors/CTP/macro/CreateCTPConfig.C
Auto-merging DataFormats/Detectors/CTP/src/Configuration.cxx
CONFLICT (content): Merge conflict in DataFormats/Detectors/CTP/src/Configuration.cxx
Auto-merging DataFormats/Detectors/CTP/include/DataFormatsCTP/Digits.h
Auto-merging DataFormats/Detectors/CTP/include/DataFormatsCTP/Configuration.h
CONFLICT (content): Merge conflict in DataFormats/Detectors/CTP/include/DataFormatsCTP/Configuration.h
Removing Analysis/Tasks/PWGHF/qaTaskSimple.cxx
Removing Analysis/Tasks/PWGDQ/tableMakerMuon_pp.cxx
Automatic merge failed; fix conflicts and then commit the result.
mbombara@MacBook-Pro-3 O2 % git remote -v
origin	https://github.com/lietava/AliceO2.git (fetch)
origin	https://github.com/lietava/AliceO2.git (push)
upstream	https://github.com/AliceO2Group/AliceO2 (fetch)
upstream	https://github.com/AliceO2Group/AliceO2 (push)
mbombara@MacBook-Pro-3 O2 % git pull origin ctpdev
error: Pulling is not possible because you have unmerged files.
hint: Fix them up in the work tree, and then use 'git add/rm <file>'
hint: as appropriate to mark resolution and make a commit.
fatal: Exiting because of an unresolved conflict.
mbombara@MacBook-Pro-3 O2 %

Is it on my side?

[lietava]

try git pull --rebase
or just remove your local repository and clone fresh.

[lietava]

git reset --hard origin/<branch_name>

[lietava]

git fetch --all (before reset)

[lietava]

sorry, so:
git fetch --all
git reset --hard origin/<branch_name>
(also rm and clone should work)

[shahor02]

pythia8 was deprecated, use pythia8pp.

For the test: once you have produced the raw data, please run

o2-raw-file-check --input-conf <your_cfg_file>

there should be no any error message.

[lietava]

[O2/latest-ctpdev-o2] ~/o2tests2 $> o2-raw-file-check --input-conf CTPraw.cfg
[INFO] RawDataHeader v6 is assumed
[INFO] apply check for Mismatch between flagged and calculated new TF start
[INFO] apply check for No SOX found on 1st page
[INFO] ignore check for TF does not start by new superpage
[INFO] apply check for Wrong HBF orbit increment
[INFO] apply check for Number of TFs is less than expected
[INFO] apply check for Number of HBFs per TF not as expected
[INFO] apply check for Data does not start with TF/HBF
[INFO] apply check for New HBF starts w/o closing old one
[INFO] ignore check for RDH.stop set of 1st HBF page
[INFO] apply check for Wrong RDH.pageCnt increment
[INFO] apply check for Wrong RDH.packetCounter increment
[INFO] perform check for /Wrong RDH.packetCounter increment/
[INFO] perform check for /Wrong RDH.pageCnt increment/
[INFO] perform check for /New HBF starts w/o closing old one/
[INFO] perform check for /Data does not start with TF/HBF/
[INFO] perform check for /Number of HBFs per TF not as expected/
[INFO] perform check for /Number of TFs is less than expected/
[INFO] perform check for /Wrong HBF orbit increment/
[INFO] perform check for /No SOX found on 1st page/
[INFO] perform check for /Mismatch between flagged and calculated new TF start/
[INFO] File 0 : 22126720 bytes scanned, 3586 RDH read for 2 links from /home/rl/o2tests2/ctp.raw
[INFO] Summary of preprocessing:
[INFO] Lnk0 | Link CTP/RAWDATA/0x00000000 RO: Trig FEE:0x0000 CRU: 0 Lnk: 0 EP:0 RDHv6 Src:NIL | SPages: 1 Pages: 1793 TFs: 1 with 256 HBF in 256 blocks (0 err)
[INFO] Lnk1 | Link CTP/RAWDATA/0x00000001 RO: Trig FEE:0x0001 CRU: 0 Lnk: 1 EP:0 RDHv6 Src:NIL | SPages: 1 Pages: 1793 TFs: 1 with 256 HBF in 256 blocks (0 err)
[INFO] First orbit: 0, Last orbit: 255
[INFO] Largest super-page: 11063360 B, largest TF: 11063360 B
Real time 0:00:00, CP time 0.010
[O2/latest-ctpdev-o2] ~/o2tests2 $>