TBS Unify PRO32

[bugbaal]

I notice a little bug using this vtx.
If I set the low and high power differente value, for example low 25 and high 200 when I arm the model, after few seconds the video turn off (not vtx, I can see that the vtx led are both turn on) and comes back after few seconds.
Instead If I set same value for low and high power the issue never happened.
I tried many times to set equal and difference value and the result is always the same.
For the test I used the LUA script for Taranis X9d.
I use the Tramp vtx too and the problem never happend, just this new vtx

[awolf78]

Unfortunately TBS decided to cut the power when switching from one power level to another for the Pro32 Nano. Makes sense for channel/frequency changes, but not for power changes. Oh well.
As a workaround you can assign a switch for low/high power - and flip the switch before you are ready to fly.

[bugbaal]

Oh my...! And is it not possible to talk with TBS for restoring the more sense previous behavior?

[awolf78]

You can try talking to Trappy. The more users complain of FB, the more likely it will be changed...