ci(pre-commit): Apply automatic fixes

Author: pre-commit-ci-lite[bot]

libraries/Matter/examples/MatterSimpleWidowsBlind/MatterSimpleWidowsBlind.ino

@@ -1,92 +1,92 @@
-// Copyright 2025 Espressif Systems (Shanghai) PTE LTD
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-//     http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-
-// Matter Simple Window Blinds Example
-// This is a minimal example that only controls Lift percentage using a single onGoToLiftPercentage() callback
-
-#include <Matter.h>
-#if !CONFIG_ENABLE_CHIPOBLE
-// if the device can be commissioned using BLE, WiFi is not used - save flash space
-#include <WiFi.h>
-#endif
-
-// List of Matter Endpoints for this Node
-// Window Covering Endpoint
-MatterWindowCovering WindowBlinds;
-
-// CONFIG_ENABLE_CHIPOBLE is enabled when BLE is used to commission the Matter Network
-#if !CONFIG_ENABLE_CHIPOBLE
-// WiFi is manually set and started
-const char *ssid = "your-ssid";          // Change this to your WiFi SSID
-const char *password = "your-password";  // Change this to your WiFi password
-#endif
-
-// Simple callback - handles window Lift change request
-bool onBlindLift(uint8_t liftPercent) {
-    // This example only uses lift
-    Serial.printf("Window Covering change request: Lift=%d%%\r\n", liftPercent);
-    
-    // Returning true will store the new Lift value into the Matter Cluster 
-    return true;
-  }
-  
-  void setup() {
-    Serial.begin(115200);
-    delay(1000);
-    Serial.println("\n========================================");
-    Serial.println("Matter Simple Window Blinds Example");
-    Serial.println("========================================\n");
-  
-  // CONFIG_ENABLE_CHIPOBLE is enabled when BLE is used to commission the Matter Network
-  #if !CONFIG_ENABLE_CHIPOBLE
-    // We start by connecting to a WiFi network
-    Serial.print("Connecting to ");
-    Serial.println(ssid);
-    WiFi.mode(WIFI_STA);
-    WiFi.begin(ssid, password);
-    while (WiFi.status() != WL_CONNECTED) {
-      delay(500);
-      Serial.print(".");
-    }
-    Serial.println("");
-    Serial.println("WiFi connected");
-    Serial.print("IP address: ");
-    Serial.println(WiFi.localIP());
-  #endif
-  
-    // Initialize Window Covering endpoint
-    // Using ROLLERSHADE type (lift only, no tilt)
-    WindowBlinds.begin(100, 0, MatterWindowCovering::ROLLERSHADE);
-      
-    // Set up the onGoToLiftPercentage callback - this handles all window covering changes requested by the Matter Controller
-    WindowBlinds.onGoToLiftPercentage(onBlindLift);
-    
-    // Start Matter
-    Matter.begin();
-    Serial.println("Matter started");
-    Serial.println();
-    
-    // Print commissioning information
-    Serial.println("========================================");
-    Serial.println("Matter Node is not commissioned yet.");
-    Serial.println("Initiate the device discovery in your Matter environment.");
-    Serial.println("Commission it to your Matter hub with the manual pairing code or QR code");
-    Serial.printf("Manual pairing code: %s\r\n", Matter.getManualPairingCode().c_str());
-    Serial.printf("QR code URL: %s\r\n", Matter.getOnboardingQRCodeUrl().c_str());
-    Serial.println("========================================");
-  }
-  
-  void loop() {
-    delay(100);
-  }
+// Copyright 2025 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// Matter Simple Window Blinds Example
+// This is a minimal example that only controls Lift percentage using a single onGoToLiftPercentage() callback
+
+#include <Matter.h>
+#if !CONFIG_ENABLE_CHIPOBLE
+// if the device can be commissioned using BLE, WiFi is not used - save flash space
+#include <WiFi.h>
+#endif
+
+// List of Matter Endpoints for this Node
+// Window Covering Endpoint
+MatterWindowCovering WindowBlinds;
+
+// CONFIG_ENABLE_CHIPOBLE is enabled when BLE is used to commission the Matter Network
+#if !CONFIG_ENABLE_CHIPOBLE
+// WiFi is manually set and started
+const char *ssid = "your-ssid";          // Change this to your WiFi SSID
+const char *password = "your-password";  // Change this to your WiFi password
+#endif
+
+// Simple callback - handles window Lift change request
+bool onBlindLift(uint8_t liftPercent) {
+  // This example only uses lift
+  Serial.printf("Window Covering change request: Lift=%d%%\r\n", liftPercent);
+
+  // Returning true will store the new Lift value into the Matter Cluster
+  return true;
+}
+
+void setup() {
+  Serial.begin(115200);
+  delay(1000);
+  Serial.println("\n========================================");
+  Serial.println("Matter Simple Window Blinds Example");
+  Serial.println("========================================\n");
+
+// CONFIG_ENABLE_CHIPOBLE is enabled when BLE is used to commission the Matter Network
+#if !CONFIG_ENABLE_CHIPOBLE
+  // We start by connecting to a WiFi network
+  Serial.print("Connecting to ");
+  Serial.println(ssid);
+  WiFi.mode(WIFI_STA);
+  WiFi.begin(ssid, password);
+  while (WiFi.status() != WL_CONNECTED) {
+    delay(500);
+    Serial.print(".");
+  }
+  Serial.println("");
+  Serial.println("WiFi connected");
+  Serial.print("IP address: ");
+  Serial.println(WiFi.localIP());
+#endif
+
+  // Initialize Window Covering endpoint
+  // Using ROLLERSHADE type (lift only, no tilt)
+  WindowBlinds.begin(100, 0, MatterWindowCovering::ROLLERSHADE);
+
+  // Set up the onGoToLiftPercentage callback - this handles all window covering changes requested by the Matter Controller
+  WindowBlinds.onGoToLiftPercentage(onBlindLift);
+
+  // Start Matter
+  Matter.begin();
+  Serial.println("Matter started");
+  Serial.println();
+
+  // Print commissioning information
+  Serial.println("========================================");
+  Serial.println("Matter Node is not commissioned yet.");
+  Serial.println("Initiate the device discovery in your Matter environment.");
+  Serial.println("Commission it to your Matter hub with the manual pairing code or QR code");
+  Serial.printf("Manual pairing code: %s\r\n", Matter.getManualPairingCode().c_str());
+  Serial.printf("QR code URL: %s\r\n", Matter.getOnboardingQRCodeUrl().c_str());
+  Serial.println("========================================");
+}
+
+void loop() {
+  delay(100);
+}