Revert "attempt at start_server method"

This reverts commit c72cd97.

Author: mscosti

adafruit_esp32spi/adafruit_esp32spi.py

@@ -66,7 +66,6 @@
 _GET_CURR_ENCT_CMD     = const(0x26)
 
 _SCAN_NETWORKS         = const(0x27)
-_START_SERVER_TCP_CMD  = const(0x28)
 _GET_SOCKET_CMD        = const(0x3F)
 _GET_STATE_TCP_CMD     = const(0x29)
 _DATA_SENT_TCP_CMD     = const(0x2A)
@@ -663,25 +662,6 @@ def socket_close(self, socket_num):
         if resp[0][0] != 1:
             raise RuntimeError("Failed to close socket")
 
-    def start_server(self, port, socket_num, conn_mode=TCP_MODE, ip=None):
-        if self._debug:
-            print("*** starting server")
-        self._socknum_ll[0][0] = socket_num
-        port_param = struct.pack('>H', port)
-        if ip:      # use the 4 arg version
-            resp = self._send_command_get_response(_START_SERVER_TCP_CMD,
-                                                    (ip,
-                                                    port_param,
-                                                    self._socknum_ll[0],
-                                                    (conn_mode,)))
-        else:       # use the 3 arg version
-            resp = self._send_command_get_response(_START_SERVER_TCP_CMD,
-                                                (port_param,
-                                                self._socknum_ll[0],
-                                                (conn_mode,)))
-        if resp[0][0] != 1:
-            raise RuntimeError("Could not start server")
-
     def set_esp_debug(self, enabled):
         """Enable/disable debug mode on the ESP32. Debug messages will be
         written to the ESP32's UART."""

adafruit_esp32spi/adafruit_esp32spi_socket.py

@@ -66,7 +66,6 @@ def __init__(self, family=AF_INET, type=SOCK_STREAM, proto=0, fileno=None):
             raise RuntimeError("Only SOCK_STREAM type supported")
         self._buffer = b''
         self._socknum = _the_interface.get_socket()
-        print("socknum: ", self._socknum)
         self.settimeout(0)
 
     def connect(self, address, conntype=None):
@@ -149,9 +148,6 @@ def settimeout(self, value):
         """Set the read timeout for sockets, if value is 0 it will block"""
         self._timeout = value
 
-    def get_sock_num(self):
-        return self._socknum
-
     def close(self):
         """Close the socket, after reading whatever remains"""
         _the_interface.socket_close(self._socknum)

examples/esp32spi_server.py

@@ -6,7 +6,6 @@
 from adafruit_esp32spi import adafruit_esp32spi
 import adafruit_esp32spi.adafruit_esp32spi_requests as requests
 import adafruit_esp32spi.adafruit_esp32spi_wifimanager as wifimanager
-import adafruit_esp32spi.adafruit_esp32spi_socket as socket
 
 print("ESP32 SPI web server test!!!!!!")
 
@@ -20,30 +19,6 @@
 
 wifi = wifimanager.ESPSPI_WiFiManager(esp, secrets, debug=True)
 
-wifi.create_ap()
-time.sleep(10)
-
-sock = socket.socket() # gets and creates a socket
-sock_num = sock.get_sock_num() # returns socket number
-
-esp.start_server(sock_num, 80)
-print("socket num: ", sock_num)
-print("socket status?: ", esp.socket_status(sock_num))
-print("IP addr: ", esp.pretty_ip(esp.ip_address))
-
-status = 0
-while True:
-    if status != esp.status:
-        status = esp.status
-
-        if status == 8:
-            print("Device connected!") ## works
-        else:
-            print("Device disconnected status=", status) ## works
-
-    print("socket available?: ", esp.socket_available(sockNum))
-    print("socket_status: ", esp.socket_status(sockNum))
-    print(sock.read())
-
+wifi.create_ap();
 
 print("done!")