1 Green, 4 orange blinks

[meijer3]

Describe the bug
Sensorbox2 blinks 1 time green, and 4 times orange. (evse v3)
On a Landis+Gyr e360 P1 (in Sweden)
MAINSMET = sensorbox
When successful it actually reads the L values

Upload your config
settings.json

To Reproduce
This happens directly. In smart modes

Expected behaviour
Every 2 seconds is a success read of the p1

[mstegen]

Have you updated the firmware on the Sensorbox to 2.1.0?

In this case you can send the phase measurements using:

• rs485 cable
• Upload data to SmartEVSE option (using a http call) on the web interface.

I have noticed that if you use both, it will blink in a semi random pattern.
Could that be the issue?

[meijer3]

My firmware is this one: SmartEVSE/SmartEVSE-3#90
Current version: "14:07:11 @may 4 2025"
Since my wifi name contains spaces. (it works though now).

I just have a cat6 internet cable between SmartEVSE and sensor box.
Even if i disable the mainset. The pattern continues

I dont have the SmartEVSE working yet. It just wont start charging, but that might be another problem for another day without rain

[dingo35]

"Even if i disable the mainset."

What do you mean by that?

"I dont have the SmartEVSE working yet. It just wont start charging, but that might be another problem for another day without rain"

First start out charging in Normal Mode, if that works, switch to Smart Mode with Sensorbox, if you got that working switch to Solar mode. Baby steps....

[meijer3]

So 2 problems.

I upgraded the SmartEVSE to v3.8.3. Super basic, without any settings on smart or mainset.
Still the sensorbox is blinking 1 time green and the rest red.

The other problem is, that my SmartEVSE is saying "Ready to Charge".

1. I measure that the 3 phases have 230v
2. CP is connected (fixed cable)
3. There is 678ohm between CP and earth

But the SmartEVSE keep saying : Connected:No and it wont start charging. Do I miss something?
(Nissan Leaf 2018)

[mstegen]

Could you please answer our questions?
question: Have you updated the firmware on the Sensorbox to 2.1.0?
question by dingo35: "Even if i disable the mainset." What do you mean by that?