entry: Inline syscall_exit_to_user_mode()

Similar to commit 221a164 ("entry: Move syscall_enter_from_user_mode()
to header file"), move syscall_exit_to_user_mode() to the header file as
well.

Testing was done with the byte-unixbench syscall benchmark (which calls
getpid) and QEMU. On riscv I measured a 7.09246% improvement, on x86 a
2.98843% improvement, on loongarch a 6.07954% improvement, and on s390 a
11.1328% improvement.

The Intel bot also reported "kernel test robot noticed a 1.9% improvement
of stress-ng.seek.ops_per_sec".

Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/all/20250320-riscv_optimize_entry-v6-4-63e187e26041@rivosinc.com
Link: https://lore.kernel.org/linux-riscv/202502051555.85ae6844-lkp@intel.com/

Author: charlie-rivos

include/linux/entry-common.h

@@ -14,6 +14,7 @@
 #include <linux/kmsan.h>
 
 #include <asm/entry-common.h>
+#include <asm/syscall.h>
 
 /*
  * Define dummy _TIF work flags if not defined by the architecture or for
@@ -366,6 +367,15 @@ static __always_inline void exit_to_user_mode(void)
 	lockdep_hardirqs_on(CALLER_ADDR0);
 }
 
+/**
+ * syscall_exit_work - Handle work before returning to user mode
+ * @regs:	Pointer to current pt_regs
+ * @work:	Current thread syscall work
+ *
+ * Do one-time syscall specific work.
+ */
+void syscall_exit_work(struct pt_regs *regs, unsigned long work);
+
 /**
  * syscall_exit_to_user_mode_work - Handle work before returning to user mode
  * @regs:	Pointer to currents pt_regs
@@ -379,7 +389,30 @@ static __always_inline void exit_to_user_mode(void)
  * make the final state transitions. Interrupts must stay disabled between
  * return from this function and the invocation of exit_to_user_mode().
  */
-void syscall_exit_to_user_mode_work(struct pt_regs *regs);
+static __always_inline void syscall_exit_to_user_mode_work(struct pt_regs *regs)
+{
+	unsigned long work = READ_ONCE(current_thread_info()->syscall_work);
+	unsigned long nr = syscall_get_nr(current, regs);
+
+	CT_WARN_ON(ct_state() != CT_STATE_KERNEL);
+
+	if (IS_ENABLED(CONFIG_PROVE_LOCKING)) {
+		if (WARN(irqs_disabled(), "syscall %lu left IRQs disabled", nr))
+			local_irq_enable();
+	}
+
+	rseq_syscall(regs);
+
+	/*
+	 * Do one-time syscall specific work. If these work items are
+	 * enabled, we want to run them exactly once per syscall exit with
+	 * interrupts enabled.
+	 */
+	if (unlikely(work & SYSCALL_WORK_EXIT))
+		syscall_exit_work(regs, work);
+	local_irq_disable_exit_to_user();
+	exit_to_user_mode_prepare(regs);
+}
 
 /**
  * syscall_exit_to_user_mode - Handle work before returning to user mode
@@ -410,7 +443,13 @@ void syscall_exit_to_user_mode_work(struct pt_regs *regs);
  * exit_to_user_mode(). This function is preferred unless there is a
  * compelling architectural reason to use the separate functions.
  */
-void syscall_exit_to_user_mode(struct pt_regs *regs);
+static __always_inline void syscall_exit_to_user_mode(struct pt_regs *regs)
+{
+	instrumentation_begin();
+	syscall_exit_to_user_mode_work(regs);
+	instrumentation_end();
+	exit_to_user_mode();
+}
 
 /**
  * irqentry_enter_from_user_mode - Establish state before invoking the irq handler

kernel/entry/common.c

@@ -146,7 +146,7 @@ static inline bool report_single_step(unsigned long work)
 	return work & SYSCALL_WORK_SYSCALL_EXIT_TRAP;
 }
 
-static void syscall_exit_work(struct pt_regs *regs, unsigned long work)
+void syscall_exit_work(struct pt_regs *regs, unsigned long work)
 {
 	bool step;
 
@@ -173,53 +173,6 @@ static void syscall_exit_work(struct pt_regs *regs, unsigned long work)
 		ptrace_report_syscall_exit(regs, step);
 }
 
-/*
- * Syscall specific exit to user mode preparation. Runs with interrupts
- * enabled.
- */
-static void syscall_exit_to_user_mode_prepare(struct pt_regs *regs)
-{
-	unsigned long work = READ_ONCE(current_thread_info()->syscall_work);
-	unsigned long nr = syscall_get_nr(current, regs);
-
-	CT_WARN_ON(ct_state() != CT_STATE_KERNEL);
-
-	if (IS_ENABLED(CONFIG_PROVE_LOCKING)) {
-		if (WARN(irqs_disabled(), "syscall %lu left IRQs disabled", nr))
-			local_irq_enable();
-	}
-
-	rseq_syscall(regs);
-
-	/*
-	 * Do one-time syscall specific work. If these work items are
-	 * enabled, we want to run them exactly once per syscall exit with
-	 * interrupts enabled.
-	 */
-	if (unlikely(work & SYSCALL_WORK_EXIT))
-		syscall_exit_work(regs, work);
-}
-
-static __always_inline void __syscall_exit_to_user_mode_work(struct pt_regs *regs)
-{
-	syscall_exit_to_user_mode_prepare(regs);
-	local_irq_disable_exit_to_user();
-	exit_to_user_mode_prepare(regs);
-}
-
-void syscall_exit_to_user_mode_work(struct pt_regs *regs)
-{
-	__syscall_exit_to_user_mode_work(regs);
-}
-
-__visible noinstr void syscall_exit_to_user_mode(struct pt_regs *regs)
-{
-	instrumentation_begin();
-	__syscall_exit_to_user_mode_work(regs);
-	instrumentation_end();
-	exit_to_user_mode();
-}
-
 noinstr void irqentry_enter_from_user_mode(struct pt_regs *regs)
 {
 	enter_from_user_mode(regs);