FW12 BIOS 3.06 missing from LVFS

[colindean]

Device Information

System Model or SKU

• Framework Laptop 12 (13th Gen Intel® Core™)

BIOS VERSION

❯ sudo dmidecode --string bios-version
03.04

DIY Edition information

If you are experiencing an issue on a DIY system, Please also fill out the memory and storage devices you are using.

Memory

sudo dmidecode -t memory
# dmidecode 3.6
Getting SMBIOS data from sysfs.
SMBIOS 3.4 present.

Handle 0x0018, DMI type 16, 23 bytes
Physical Memory Array
        Location: System Board Or Motherboard
        Use: System Memory
        Error Correction Type: None
        Maximum Capacity: 48 GB
        Error Information Handle: Not Provided
        Number Of Devices: 1

Handle 0x0019, DMI type 17, 92 bytes
Memory Device
        Array Handle: 0x0018
        Error Information Handle: Not Provided
        Total Width: 64 bits
        Data Width: 64 bits
        Size: 48 GB
        Form Factor: SODIMM
        Set: None
        Locator: Controller0-ChannelA-DIMM0
        Bank Locator: BANK 0
        Type: DDR5
        Type Detail: Synchronous
        Speed: 5600 MT/s
        Manufacturer: Micron Technology
        Serial Number: EB22DBF8
        Asset Tag: 9876543210
        Part Number: CT48G56C46S5.M16C1
        Rank: 2
        Configured Memory Speed: 5200 MT/s
        Minimum Voltage: Unknown
        Maximum Voltage: Unknown
        Configured Voltage: 1.1 V
        Memory Technology: DRAM
        Memory Operating Mode Capability: Volatile memory
        Firmware Version: Not Specified
        Module Manufacturer ID: Bank 1, Hex 0x2C
        Module Product ID: Unknown
        Memory Subsystem Controller Manufacturer ID: Unknown
        Memory Subsystem Controller Product ID: Unknown
        Non-Volatile Size: None
        Volatile Size: 48 GB
        Cache Size: None
        Logical Size: None

Storage

❯ lshw -class disk -class storage
WARNING: you should run this program as super-user.
  *-nvme
       description: NVMe device
       product: CT2000P310SSD2
       vendor: Micron/Crucial Technology

Port/Peripheral information

I had been experiencing a built-in trackpad failure, but it recovered after several reboots. Framework Support recommended upgrading the firmware.

Standalone Operation

Are you running your mainboard as a standalone device. Is standalone mode enabled in the BIOS?

• Yes
• No

Describe the bug

When I run the LVFS updater, the 3.06 BIOS is not available and is not installed despite being available for a couple of months and is available at https://knowledgebase.frame.work/framework-laptop-12-bios-and-driver-releases-13th-gen-intel-core-HyrqeX2ex.

Steps To Reproduce

fwupdmgr refresh --force && fwupdmgr get-updates && fwupdmgr update

Notice no updates are available, yet the laptop is still using BIOS 3.04.

Expected behavior

I expected to be prompted to update the BIOS to 3.06.

Operating System (please complete the following information):

❯ lsb-release -a
LSB Version:    n/a
Distributor ID: Bluefin
Description:    Bluefin (Version: gts-42.20251223)
Release:        42
Codename:       Deinonychus
❯ uname -a
Linux lucca 6.17.8-200.fc42.x86_64 #1 SMP PREEMPT_DYNAMIC Fri Nov 14 04:52:44 UTC 2025 x86_64 GNU/Linux

Additional context

~
❯ fwupdmgr refresh --force && fwupdmgr get-updates && fwupdmgr update
Updating lvfs
Downloading…             [************************               ]
Successfully downloaded new metadata:
 • 10 devices are updatable
 • 4 devices are supported in the enabled remotes (an update has been published)
Successfully uploaded report
Devices with no available firmware updates:
 • frame.work-LaptopDB
 • frame.work-LaptopKEK
 • CT2000P310SSD2
 • KEK CA
 • Laptop 12 Webcam Module
 • SBAT
 • Touchscreen ILI2901
 • Windows UEFI CA
Devices with the latest available firmware version:
 • Intel Management Engine
 • System Firmware
 • UEFI CA
 • UEFI dbx
No updates available

[quinchou77]

Please check again, it has been moved back.

[JohnAZoidberg]

It accidentally ended up back in the testing/beta target, we moved it back. After an hour you can run fwupdmg refresh again and then it'll show up for you.